The new RIC 2008 is available – now on DVD!

ROEMHELD Interactive Catalogue - RIC 2008

The electronic catalogue RIC 2008 contains extended information on our catalogue products. For the first time we published the RIC on a DVD instead of three CDs.

The RIC corresponds in structure, functionality and content more or less to the online catalogue.

The RIC contains all 2D and 3D CAD data, only the 3D CATIA formats are solely available on our website for download.

» more information

» ask for RIC 2008

Power workholding - New product B18812

Swing clamp with pendulum eye or fork head

flange-type version at the bottom

with optional position monitoring

The piston end of this swing clamp is designed as pendulum eye or fork head. By means of a double clamping arm 2 workpieces can be clamped at the same time.

» Data sheet B1.8812

New product – High-pressure filter

Rectifier filter made of stainless steel

max. operating pressure 350 bar

The filter element is flown through always in one direction during the operating stroke as well as during the return stroke.

This implies safe removal of contaminations

and thereby optimum protection of high-quality components.

» Data sheet F 9.500

Hydraulic valve – New product C29545

Sequence valve ND with time-dependent switching sequence

max. operating pressure 250 bar

The adjustable switching delay allows a time-dependent switching sequence of hydraulic elements within a hydraulic circuit, independent of the hydraulic pressure.

» Data sheet C 2.9545

Power workholding - New product S008

Bore clamp – eccentric version

for bore hole diameter 9.2 – 9.8 mm,

3 different clamping inserts

Due to the small dimensions at the effective point and the compact design direct clamping in recesses e.g. of cast parts is possible.

Also workpieces with raised parts right next to the bore to be clamped are suitable.

» ROEMHELD information S008

Power workholding - New product B18251

New size 3 of hinge clamp B 1.8251

double acting, max. operating pressure 250 bar

In addition to the first two sizes with a maximum clamping force of 4.0 and 10.0 kN, now the third size is available.

The new size allows a clamping force of up to 14.2 kN and is equipped with a standard metallic wiper.

» Data sheet B 1.8251

Power workholding - New product B18802

Swing clamp with pendulum eye or fork head

flange-type version at the top

with optional position monitoring

The piston end of this swing clamp is designed as pendulum eye or fork head. By means of a double clamping arm 2 workpieces can be clamped at the same time.

» Data sheet B1.8802

New product – Coupling element

Coupling elements without coupling stroke

Threaded-body type, DN 4

depressurised coupling,

max. operating pressure

200 bar

The coupling elements have a flat surface and do not have protruding elements for sealing. Therefore exact positioning

is not required and a radial positioning misalignment of up

to 2 mm is admitted.

Because of the omitted active axial coupling stroke completely new solutions for the coupling motion can be realised .

» Data sheet F 9.461

New product - Power workholding B1852

Swing clamp with sturdy swing mechanism

Cartridge type,

with optional position monitoring

The sturdy swing mechanism endures a collision of the clamping arm with the workpiece during clamping.

Due to the favourable diameter ratio piston/piston rod high clamping forces are obtained even with low oil pressure.

» Data sheet B1.852

Power workholding - New product B1481

New versions of the bore clamp B 1.481

Versions with compensation in one axial direction and with compensation in all directions

The bore clamp is particularly suitable for centring and clamping of workpieces with smoothly machined bores with diameters from 16 to 46 mm and a support surface square to the hole axis.

» Data sheet B 1.481

Power workholding - New product S007

Swing clamp with inductive position monitoring

flange-type version at the bottom

Inductive proximity switches are used for position monitoring. They are installed in the housing of the swing clamp.

The control cap for activation of the proximity switches is connected to the clamping arm to enable permanent position monitoring of the clamping arm.

Electric connection is made by a right angle plug directly at the housing of the swing clamp.

» ROEMHELD information S007