Search in the selected range:
 all products
 one selection level up
Customer area: Not logged in
 

Selection aids > Hydraulic clamping elements > Bore clamp

 
 
Product selection

Results 6 from 6 Products
B1.480 Hydraulic threaded-body clamping modules
pull-type
single and double acting
with protection against torsion
max. operating pressure 500 bar
Pull-type threaded-body clamping module, which can be used for radial clamping in bore holes in combination with Ringspann discs or Urelast material.
option: mounting body
1 size with max. force to pull of 24.5 kN
clamping stroke, pull type 6 mm
B1.481 Bore clamp with centring function
double-acting , pull-type
clamping diameter 16 to 46 mm
max. operating pressure from 50 up to 350 bar
Clamping element for centring and clamping of workpieces with smooth machined bores and a support surface square to the bore axis
bore hole diameter from 16 to 46 mm
5 sizes with max. low clamping force of 7.9 kN
accessories: segment clamping bushings with 0.1 mm graduation
B1.4841 Bore clamp
Block-type
without centring function
double acting
for bore hole diameter 7.8 - 17.7 mm
max. operating pressure 250 bar
Clamping elements in block-type version for clamping of workpieces,
with bore holes in the support face

bore hole diameter from 7.8 to 17.7 mm
with pneumatic seat check
with connection for positive air pressure protection
2 sizes with max. low clamping force of 9.8 kN
accessories: spare clamping sets
B1.4842 Bore clamp
Flange-type version
without centring function
double acting
for bore hole diameter 7.8 - 17.7 mm
max. operating pressure 250 bar
Clamping elements in flange-type version for clamping of workpieces,
with bore holes in the support face

bore hole diameter from 7.8 to 17.7 mm
with pneumatic seat check
with connection for positive air pressure protection
2 sizes with max. low clamping force of 9.8 kN
accessories: spare clamping sets
B1.4843 Bore clamp
Cartridge type
without centring function
double acting
for bore hole diameter 7.8 - 17.7 mm
max. operating pressure 250 bar
Clamping elements in cartridge-type version for clamping of workpieces,
with bore holes in the support face

bore hole diameter from 7.8 to 17.7 mm
with pneumatic seat check
with connection for positive air pressure protection
2 sizes with max. low clamping force of 9.8 kN
accessories: spare clamping sets
B1.485 Bore Clamps
block-type eccentric
for bore hole diameter 6.6 to12.3 mm
double acting
max. operating pressure 250 bar
Clamping elements for positioning and clamping of workpieces, with bore holes in the support surface
compact eccentric design
versions with centring, with compensation in one axial direction and with compensation in all directions
with pneumatic seat check
with connection for positive air pressure protection
4 sizes with max. pulling force of 6.3 kN